This report was the first of its kind to analyze the green job market in MI (3% of workforce) through an analytical (industrial and occupational trends), qualitative (focus groups), and quantitative (employer survey) approach. Discussed are Michigan's green related industries and occupations, and also tracking them. It's concluded that the MI green job market has further potential and is growing despite an economic downturn.

This resource is composed of materials from Wayne State University's professional development workshops which are designed to introduce educators to hybrid electric and electric vehicle fundamentals. Included materials are an event agenda, faculty presentations, and fliers.

This resource contains presentations from one of the Center for Automotive Research's (CAR's) breakfast briefings titled "Automotive Fuels and Emissions: Policies, Compliance, & Potential Impact of Future Technologies." This briefing occurred on 12/5/13 at Robert Bosch LLC in Farmington Hills, MI. At the briefing presenters discussed the strategic implications of Tier 3 regulations which will soon be finalized and may impact future technology decisions in a multitude of ways. The impact of Tier 3 emission regulations is expected to be far reaching as they have the potential to influence the quality of fuel, as well as usage of alternative fuels and powertrains. Further, the regulations will have a direct influence on the technologies, such as diesel and gasoline direct injection, that automakers will utilize to meet the fuel economy standards through MY2025. Included in this resource are the presentations from the National Renewable Energy Laboratory (NREL), Volkswagen, and Bosch utilized at the briefing.

This resource contains presentations from the Center for Automotive Research (CAR) 2013 Management Briefing Seminars held August 5-8, 2013. With over 900 attendees from industry, government, media, and academia, the event featured outstanding presentations from industry thought leaders as well as various networking and social events. Using CAR research as a foundation, these seminars revolved around global manufacturing strategies, lightweighting, connected vehicles, powertrain developments, sales forecasting, purchasing, policy, designing for technology, and capital investment.

This resource contains speaker presentations from the 2013 Plug-In Conference and Exposition. This conference took place September 30, 2013 to October 3, 2013 at Liberty Station in San Diego, CA and had the theme What's Next for the Electric Highway? This event brought together automotive manufacturers, component suppliers, electric utilities, government agencies, academia, and the environmental community to collaborate on the next steps in plug-in electric vehicle technology, infrastructure, policies and regulations, and market development.

This resource contains the agenda and presentations from the 2014 Center for Advanced Automotive Technology (CAAT) Conference: You Can't See the Future in the Rearview Mirror. This conference took place on May 2, 2014 at Macomb Community College's South Campus in Warren, MI and was attended by more than 120 individuals representing various high schools, community colleges, and universities as well as multiple government agencies, professional organizations, and industry workforce representatives.

This resource contains presentations from the Center for Automotive Research (CAR) 2014 Management Briefing Seminars held August 4-7, 2014. With attendees from industry, government, media, and academia, the event featured outstanding presentations from industry thought leaders as well as various networking and social events. Using CAR research as a foundation, these seminars revolved around the most important issues facing the automotive industry today: manufacturing, powertrain, sales forecasting, connected and automated vehicles, purchasing, talent, and supply chain.

This resource contains a presentation from a webinar and video of the webinar regarding a study carried out by Ducker Worldwide and funded by The Aluminum Association to evaluate the aluminum content in 2015 model year vehicles and the projected aluminum content growth through 2025. Also included is the executive summary of the study.

The following course was created by Grand Rapids Community College (GRCC), through seed funding from theCAAT, to train workers for entry level positions in the advanced energy manufacturing industry. The course is designed around OSHA's "Standards for General Industry" and if taught by an authorized General Industry Outreach Training Program Instructor, students should receive an OSHA General Industry 30-hour Safety certification. Instructional materials include PowerPoint presentations, instructor notes, OSHA instructor and student manuals (handouts/assignments), and lesson objectives. All lessons are intended to be taught through PowerPoint presentations with guidance from the included lesson objectives and notes for instructors. The included PowerPoints are original OSHA presentations modified by GRCC and originals created by GRCC. The lesson topics are: Introduction to OSHA Safety and Health Programs, Hazard Mapping, Personal Protective Equipment, Exit Routes and Emergency Action Plans, Fire Protection and Prevention, Electrical Hazards, Ergonomics and Manual Material Handling, Walking and Working Surfaces, Industrial Hygiene, Flammable and Combustible Liquids Hazard CommunicationExit Routes and Emergency Action Plans, Fire Protection and Prevention, First Aid and CPR, Hand and Power Tool Safety, Machine Guarding, and Control of Hazardous Energy (Lockout/Tag-out).For more information on the course visit https://learning.grcc.edu/ec2k/CourseListing.asp?master_id=777&course_area=CEMF&course_number=102&course_subtitle=00.

This three credit course offered at Macomb Community College provides an introduction to hybrid electric vehicles (HEVs). Material covered includes alternative fuels, HEV batteries and accessories, HEV maintenance and diagnostics, regenerative braking, and safety procedures. Included educational materials for this course are crosswords, sample exams and quizzes, labs, lesson plans, pre/post assessments, and syllabus. Solutions are not provided with any materials. If you're an instructor and would like complete exams, quizzes, or solutions, please contact theCAAT. This course is composed of ten modules that may be used to supplement existing courses or taught together as a complete course. Module subjects are: Carbon Fuels and the Environment, Intro to Hybrid Electric Vehicles (HEV), Internal Combustion Engine (ICE) Systems, Gasoline and Alternative Fuels, HEV Batteries and Service, Electric Motors, Generators, and Controllers, Regenerative Braking, HEV Transmissions and Transaxles, HEV Climate Control, and HEVFirst Resonder and Safety Procedures

This three credit course offered at Macomb Community College discusses the practical application of hybrid electric vehicle (HEV) power management systems. Areas of study include computer controls of the internal combustion engine (ICE), battery types, HEV thermal management, motors, safety, and HEV/EV accessories. System types, service procedures, and diagnostic procedures are covered for Ford, General Motors, Honda, and Lexus/Toyota vehicles. Included educational materials for this course are homework, sample exams and quizzes, labs, lesson plans, pre-assessment, and syllabus. Solutions are not provided with any materials. If you're an instructor and would like complete exams, quizzes, or solutions, please contact theCAAT. This course is composed of six modules that can be used to supplement existing courses or taught together as a complete course. These modules are Intro to HEVs,Honda HEVs, Toyota HEVs,Ford HEVs, GM HEVs, and Fuel Cells

This four credit course offered by Macomb Community College provides practical training in the theory and basic design aspects of electric vehicle propulsion systems and is a required course for MCC's Electric VehicleDevelopment Technology Certificate. Primary subjects covered include rationale forelectric vehicles(EVs), safety, battery technologies, basic battery testing, electric machine (motor) types, electric machine operation, power management, power inverters, DC to DC converters, accessory systems, and potential future technologies. Educational materials included arethe first day handout, detailed course outcomes, homework (no solutions), labs, pre/post assessments, presentations, sample quizzes/exams, syllabus, and more. If you're an instructor and need access to homework solutions or complete exams/quizzes, please contact theCAAT. This course is composed of nine modules thatcan be used to supplement existing courses or can betaught together as a complete course.These modules are The Need for EVs, EV Safety, Introduction to Battery Chemistry, Battery Pack Integration with Vehicle Systems, Electric Machines (DC Motors, AD Induction Asynchronous Motors, Permanent Magnet Synchronous Motor, and Switched Reluctance Motors), Power Inverter/Electronic Motor Controls, DC to DC Converters, Vehicle Accessory Systems, and Introduction to Advancing Technology (Fuel Cells, Ultra Capacitors, and Hydraulic Propulsion)

Students learn about the concepts of accuracy and approximation as they pertain to robotics, gain insight into experimental accuracy, and learn how and when to estimate values that they measure. Students also explore sources of error stemming from the robot setup and rounding numbers.

This video segment adapted from First Light explains why the highest peak in the Pacific, Mauna Kea, is an ideal site for astronomical observations. Featured are new telescope technologies that allow astronomers to explore the universe in more depth.

This article describes covert and overt active engagement strategies for use with elementary students. Find the Question templates are included for use with informational text.

The following module consists of a PowerPoint presentation, two lab sheets, and a syllabus for modifying automotive engine courses to include HEV technologies and was developedthrough a seed grant from theCAAT. The PowerPoint discusses the application of variable valve timing (VVT) and Atkinson cycle principals to HEVs, and the extra hydrocarbon capturing devices added to HEVs due to the use VVT and Atkinson principles. The lab "Compression Testing VVT systems" reinforces the ideas of the presentation illustrating engine malfunctions caused by a faulty VVT system. For additional insight on HEV engine service procedures, an oil change lab sheet for HEVs is included. For educators looking to modify current courses, the syllabus has highlighted fields where HEV technologies were incorporated to an engines course at Lewis and Clark Community College.

This resource was developedthrough a seed grant from theCAAT and discusses the advanced air conditioningsystems placed inHEVsand safety precautions to follow when servicing them. These systems are high voltage A/C compressors and thecomponents controlling them (A/CECU, HV ECU,and Converter Control Circuit). Safety precautions discussed include Class 0 insulated gloves, insulated tools, color coding of wire looms to indicate voltage, CAT III and IV multimeter use, and properly disabling high voltage circuits. For educators looking to modify current courses, a syllabus is included with highlighted fields where HEVsystems and safety were incorporated into an existing automotive heating and cooling course at Lewis and Clark Community College.

Our brains control every movement we make. Most of us take for granted our ability to pick up a cup or change the television station. However, for people who have lost a limb or become paralyzed, the inability to do these things means a loss of freedom and independence. This video segment from Greater Boston describes how neuroscientists and bioengineers have teamed up to create a system that allows people who have lost motor functions to control electronic devices through their thoughts alone. Grades 6-12

Do you need proof that driving is a dangerous activity? More Americans have died in car crashes over the past 100 years than in all the wars the U.S. has ever fought combined. More than 40,000 Americans die each year on the nation's highways, most as the result of high-speed collisions. In this video segment adapted from NOVA, learn how engineers developed the air bag, an important automobile-safety device now found in most cars.
Recommended for: Grades 3-12

In this video segment adapted from ZOOM, cast members make their own hovercraft and demonstrate how the air leaking out of a balloon can make a plastic plate hover above a table.