During this design brief, students will learn how to design and construct …
During this design brief, students will learn how to design and construct dragsters. Students will learn how to use tools to complete different processes while constructing their dragster. The project will conclude with a bracketed race to crown a dragster champion.Prior to assigning this project, it is recommended that you access the Design Process Lesson available through OER authored by Matt Bova and Devon Rupp. This resource is the second part of the Dragster Design Brief Unit. Please refer to the Dragster Design Brief Introduction before using this resource.
During this lesson, students will learn the basics of aerodynamics and the …
During this lesson, students will learn the basics of aerodynamics and the tools that will be used to help prepare them for the Dragster Design Brief.Prior to assigning this project, it is recommended that you access the Design Process Lesson available through OER authored by Matt Bova and Devon Rupp.
Intermediate Level Woods ProjectOveral height 24": Top is 22" X 17"Assembled with …
Intermediate Level Woods ProjectOveral height 24": Top is 22" X 17"Assembled with Pocket (KREG) screwsA drawer can be added but directions are not provided
Introductory Woods projectScrap Wood projectScrap 2x4's 7"-10" depending on the template usedScrap …
Introductory Woods projectScrap Wood projectScrap 2x4's 7"-10" depending on the template usedScrap 1x material (3/4 inch material)Vehicles can be stained or finished depending on the studnet's choice.
Introductory Woods projectSmall Wooden Box 10” x 6½” x 4½” without lid …
Introductory Woods projectSmall Wooden Box 10” x 6½” x 4½” without lid 10” x 6½” x 4⅞” with lidThis is a box that has rabbet jointed corners, a lid that lifts off and sits in with a rabbet joint and a recessed rabbet jointed bottom
Intermediate level woodworking project. Uses approximetly 1 1/2 board feet of material. This …
Intermediate level woodworking project. Uses approximetly 1 1/2 board feet of material. This project use a pneumatic nail gun and has movable handles which require measuring and aligning screw for them to open properly. Approximate dimensions: 16" X 11 1/2" X 2".
No restrictions on your remixing, redistributing, or making derivative works. Give credit to the author, as required.
Your remixing, redistributing, or making derivatives works comes with some restrictions, including how it is shared.
Your redistributing comes with some restrictions. Do not remix or make derivative works.
Most restrictive license type. Prohibits most uses, sharing, and any changes.
Copyrighted materials, available under Fair Use and the TEACH Act for US-based educators, or other custom arrangements. Go to the resource provider to see their individual restrictions.
