Third Edition Word Count: 196848 (Note: This resource's metadata has been created automatically by reformatting and/or combining the information that the author initially provided as part of a bulk import process.)
Material Type: Textbook
Tennessee State University Open Education Resource - Affordable Learning Solutions Webpage Portal for post-secondary content across higher education academic disciplines in partnership with www.MERLOT.org.
Material Type: Data Set, Reading, Teaching/Learning Strategy
Welcome to the White House 360 Virtual Tour! This immersive experience will bring you inside the halls of the White House and provide access to all the public rooms on the Ground and State Floors. It will also allow you to examine the rooms and objects even closer than you would in person. This feature was made possible in part by the National Endowment for the Humanities: Exploring the human endeavor.
Material Type: Activity/Lab, Primary Source
It has detailed content about trigonometry. The following are the contents:1History2Overview2.1Extending the definitions2.2Mnemonics2.3Calculating trigonometric functions3Applications4Pythagorean identities5Angle transformation formulae6Common formulae6.1Law of sines6.2Law of cosines6.3Law of tangents6.4Euler's formula
Material Type: Module
Are you an urban planner, designer, policy maker or involved or interested in the creation of good living environments? This course will broaden your scope and diversify your take on the field of urban planning and design. We will focus on a unique Dutch approach and analyze how it can help those involved with urban planning and design to improve the physical environment in relation to the public good it serves, including safety, wellbeing, sustainability and even beauty. You will learn some of the basic traits of Dutch Urbanism, including its: contextual approach; balance between research and design; simultaneous working on multiple scale levels. You will practice with basic techniques in spatial analysis and design pertaining to these points. You will also carry out these activities in your own domestic environment. This course is taught by the Faculty of Architecture and the Built Environment at TU-Delft, ranked no. 4 in Architecture/Built Environment on the QS World University Rankings (2016). All the material in this course is presented at entry level. But since the course has an integral perspective, combining planning and design aspects, it can still be relevant for trained professionals who feel they lack experience in either field.
Material Type: Full Course
TED Studies, created in collaboration with Wiley, are curated video collections supplemented by rich educational materials for students, educators and self-guided learners. In Ecofying Cities, speakers reveal ideas about sustainable development (and redevelopment) that aren't all about setting limits, going without or preparing for the worst. Rather, they find solutions in resourceful, hopeful, beautiful communities.
Material Type: Lecture, Reading, Teaching/Learning Strategy
Students obtain basic knowledge of the multidisciplinary aspects of the use of undergrounds space. Based on knowledge about the characteristics of several construction technologies they are able to asses their applicability in different situations. This may be different geological or physical conditions. They are able to analyze and structure the complex decision making process that is related to the use of underground space and define an integral approach
Material Type: Full Course, Lecture, Lecture Notes, Reading, Textbook
Basic skill development in hand-forging steel, forge welding, scroll-forming, shaping, and joinery utilizing hammers, anvils, and coal and gas forges. Emphasis on techniques and processes to demonstrate versatility and skill.
Material Type: Lecture Notes
Recording of Day 1 of the Three Branches Institute, featuring a condensed version of WHHA's "White House 101" lecture, exploration of WHHA's 360 Virtual Tour of the White House, and some discussion. Please note that there will be "dead air" during the mid program break as well as the second half breakout rooms.
Material Type: Lecture
White House 101: Over 200 Years of the Executive Mansion This PDF contains copies of the slides used by the White House Historical Association's K-12 Education staff during their White House 101 lecture during Day 1 of the 2021 Three Branches Institute. A link to a video recording of this session is also available on the Hub.
Material Type: Lecture
This website consists of a series of 3D simulations on engineering technology topics. Developed by and for the Eastern Iowa Community Colleges' Engineering Technology programs, these simulations, which are approximately 2-9 minutes long, are used as part of their curriculum to help students quickly and thoroughly grasp the concepts being presented in a visual format. Some simulations are paired with additional interactive quiz questions and can be downloaded as .zip files. Topics covered include: AC Circuits, DC Circuits, Digital Currents & Systems, Electrical Motor Control, Fluid Power Control, Fluid Power Design & Application, Fluid Power Fundamentals, Industrial Print Reading (Engineering Design), Industrial Robotics, Lean Manufacturing, Microcontrollers, Motion Control, Process Control, Programmable Logic Controllers, and Solid Stats & Systems. This workforce solution is funded by the Pathways to Engineering Technology Careers grant which is 100% financed through a $2.5 million grant from the U.S. Department of Labor’s Employment & Training Administration.
Material Type: Assessment, Diagram/Illustration, Interactive, Simulation
This book was written for an experimental freshman course at the University of Colorado. The course is now an elective that the majority of our electrical and computer engineering students take in the second semester of their freshman year, just before their first circuits course. Our department decided to offer this course for several reasons: we wanted to pique student' interest in engineering by acquainting them with engineering teachers early in their university careers and by providing with exposure to the types of problems that electrical and computer engineers are asked to solve; we wanted students entering the electrical and computer engineering programs to be prepared in complex analysis, phasors, and linear algebra, topics that are of fundamental importance in our discipline; we wanted students to have an introduction to a software application tool, such as MATLAB, to complete their preparation for practical and efficient computing in their subsequent courses and in their professional careers; we wanted students to make early contact with advanced topics like vector graphics, filtering, and binary coding so that they would gain a more rounded picture of modern electrical and computer engineering. In order to introduce this course, we had to sacrifice a second semester of Pascal programming. We concluded that the sacrifice was worth making because we found that most of our students were prepared for high-level language computing after just one semester of programming. We believe engineering educators elsewhere are reaching similar conclusions about their own students and curriculums. We hope this book helps create a much needed dialogue about curriculum revision and that it leads to the development of similar introductory courses that encourage students to enter and practice our craft.Students electing to take this course have completed one semester of calculus, computer programming, chemistry, and humanities. Concurrently with this course, students take physics and a second semester of calculus, as well as a second semester in the humanities. By omitting the advanced topics marked by asterisks, we are able to cover Complex Numbers through Linear Algebra, plus two of the three remaining chapters. The book is organized so that the instructor can select any two of the three. If every chapter of this book is covered, including the advanced topics, then enough material exists for a two-semester course. The first three chapters of this book provide a fairly complete coverage of complex numbers, the functions e^x and e^jand phasors. Our department philosophy is that these topics must be understood if a student is to succeed in electrical and computer engineering. These three chapters may also be used as a supplement to a circuits course. A measured pace of presentation, taking between sixteen and eighteen lectures, is sufficient to cover all but the advanced sections in Complex Numbers through Phasors. The chapter on "linear algebra" is prerequisite for all subsequent chapters. We use eight to ten lectures to cover it. We devote twelve to sixteen lectures to cover topics from Vector Graphics through Binary Codes. (We assume a semester consisting of 42 lectures and three exams.) The chapter on vector graphics applies the linear algebra learned in the previous chapter to the problem of translating, scaling, and rotating images. "Filtering" introduces the student to basic ideas in averaging and filtering. The chapter on "Binary Codes" covers the rudiments of binary coding, including Huffman codes and Hamming codes. If the users of this book find "Vector Graphics" through "Binary Codes" too confining, we encourage them to supplement the essential material in "Complex Numbers" through "Linear Algebra" with their own course notes on additional topics. Within electrical and computer engineering there are endless possibilities. Practically any set of topics that can be taught with conviction and enthusiasm will whet the student's appetite. We encourage you to write to us or to our editor, Tom Robbins, about your ideas for additional topics. We would like to think that our book and its subsequent editions will have an open architecture that enables us to accommodate a wide range of student and faculty interests. Throughout this book we have used MATLAB programs to illustrate key ideas. MATLAB is an interactive, matrix-oriented language that is ideally suited to circuit analysis, linear systems, control theory, communications, linear algebra, and numerical analysis. MATLAB is rapidly becoming a standard software tool in universities and engineering companies. (For more information about MATLAB, return the attached card in the back of this book to The MathWorks, Inc.) MATLAB programs are designed to develop the student's ability to solve meaningful problems, compute, and plot in a high-level applications language. Our students get started in MATLAB by working through “An Introduction to MATLAB,” while seated at an IBM PC (or look-alike) or an Apple Macintosh. We also have them run through the demonstration programs in "Complex Numbers". Each week we give three classroom lectures and conduct a one-hour computer lab session. Students use this lab session to hone MATLAB skills, to write programs, or to conduct the numerical experiments that are given at the end of each chapter. We require that these experiments be carried out and then reported in a short lab report that contains (i) introduction, (ii) analytical computations, (iii) computer code, (iv) experimental results, and (v) conclusions. The quality of the numerical results and the computer graphics astonishes students. Solutions to the chapter problems are available from the publisher for instructors who adopt this text for classroom use. We wish to acknowledge our late colleague Richard Roberts, who encouraged us to publish this book, and Michael Lightner and Ruth Ravenel, who taught "Linear Algebra" and "Vector Graphics" and offered helpful suggestions on the manuscript. We thank C. T. Mullis for allowing us to use his notes on binary codes to guide our writing of "Binary Codes". We thank Cédric Demeure and Peter Massey for their contributions to the writing of "An Introduction to MATLAB" and "The Edix Editor". We thank Tom Robbins, our editor at Addison-Wesley, for his encouragement, patience, and many suggestions. We are especially grateful to Julie Fredlund, who composed this text through many drafts and improved it in many ways. We thank her for preparing an excellent manuscript for production.
Material Type: Textbook
Introduction to computer programming within a numerical computing environment (MATLAB or similar) including types of data representation, graphical display of data, and development of modular programs with application to engineering analysis and problem solving.
Material Type: Full Course
While working in groups to facilitate peer tutoring, students use samples of four igneous rocks (gabbro, basalt, granite, and rhyolite) to observe differences in texture, color and grain size and make inferences about the relative cooling histories and silica content associated with each magma type. (Note: this resource was added to OER Commons as part of a batch upload of over 2,200 records. If you notice an issue with the quality of the metadata, please let us know by using the 'report' button and we will flag it for consideration.)
Material Type: Activity/Lab, Simulation
The need for this particular grammar arises from the peculiar shape of the MDiv curriculum at Asbury Theological Seminary. Several years ago the faculty adopted a curriculum that required one semester of Greek and one semester of Hebrew, each as preparatory for a basic exegesis course in each discipline. It became clear after several years of trial and error that a “lexical” or “tools” approach to learning Greek and Hebrew was inadequate, no matter how skilled the instructors or how motivated the students. In today's general vacuum of grammatical training in public education across the United States, students typically enter seminary training with no knowledge of how languages work. Any training we might give them in accessing grammatical information through the use of Bible software programs will, we learned, come to naught in the absence of an understanding of just what such information actually means. We agreed that we actually needed to “teach the language itself,” at least in some rudimentary fashion, if we hoped students would make sense of grammatical and linguistic issues involved biblical interpretation. The first 12 chapters of this grammar are designed to correspond to the first semester's instructional agenda. In these chapters we introduce all the parts of speech, explain and drill the basic elements of grammar, set forth the larger verb system (excluding the perfect system), teach the tenses of the Indicative Mood only (again, excluding the perfect system), and help students build a vocabulary of all NT words occurring 100 times or more. We also lead students into the NT itself with carefully chosen examples, while at the same time guiding them in each lesson to learn the use of the standard NT lexicon [BDAG] and an exegetical grammar [Wallace's Greek Grammar Beyond the Basics]. We are well aware of the limitations of this approach, but genuinely believe that some instruction along these lines is better than none, and that such an approach provide a foundation for students interested in moving beyond the first semester (into chapters 13-24) into a firmer grasp of the language of the NT.
Material Type: Textbook
This OER is an online language and culture manual designed for students in higher education. It is especially adapted to Canvas learning management system and includes online homework, audio and video recordings, interactive student assessments, and more. It follows a 14- or 15-week semester. Registration to Canvas Commons is required but free. To use the course materials, simply use the "Import" function on Canvas Commons and copy the course into your course shell on Canvas. Once imported, all materials can be modified as needed.
Material Type: Full Course
