This unit consists of five lessons covering architecture and structural engineering. Each lesson includes goals, anticipatory set, learner objectives, guided practice, procedure instructions, closing activities, and extensions. Student handouts and worksheets are also included.

Lesson 1: Animal Structures
Lesson 2: Homes
Lesson 3: Stability
Lesson 4: Local Towers & Bridges
Lesson 5: Schools

NGSS: K-2-ETS1-1, K-2-ETS1-2, K-2-ETS1-3, 3-5-ETS1-1, 3-5-ETS1-2, 3-5-ETS1-3

Materials: blocks or other building toys, ruler, book or ball (for weight), graph paper, pencils, and floor plan of school or hand-drawn approximation featuring highlights.

Students apply their knowledge of constructing and programming LEGO MINDSTORMS (TM)NXT robots to create sumobots - strong robots capable of pushing other robots out of a ring. To meet the challenge, groups follow the steps of the engineering design process and consider robot structure, weight and gear ratios in their designs to make their robots push as hard as possible to force robot opponents out of the ring. A class competition serves as the final test to determine the best designed robot, illustrating the interrelationships between designing, building and programming. This activity gives students the opportunity to be creative as well as have fun applying and combining what they have learned through the previous activities and lessons in this and prior units in the series. A PowerPoint (tm) presentation, pre/post quizzes and a worksheet are provided.

This lesson will introduce solar power, how it works, and energy storage to students through hands on materials and activities. It will also foster an understanding of renewable energy and how we can use renewable energy to power our cities.

Students use a table-top-sized tsunami generator to observe the formation and devastation of a tsunami. They see how a tsunami moves across the ocean and what happens when it reaches the continental shelf. Students make villages of model houses and buildings to test how different material types are impacted by the huge waves. They further discuss how engineers design buildings to survive tsunamis. Much of this activity setup is the same as for the Mini-Landscape activity in Lesson 4 of the Natural Disasters unit.

In this activity, the students will apply the concepts they learned regarding mass, volume and density in the previous activities to design a boat.

In this activity, students learn how engineers design faucets. Students will learn about water pressure by building a simple system to model faucets and test the relationship between pressure, area and force. This is a great outdoor activity on a warm day.

Students work as engineers to design and test trebuchets (in this case LEGO® MINDSTORMS® robots) that can launch objects. During the testing stage, they change one variable at a time to study its effect on the outcome of their designs. Specifically, they determine how far objects travel depending on their weights. As students learn about the different components of robot design and the specific function controls, they determine what design features are important for launching objects.

Students will create a route for their ozobot to travel using parallel, perpendicular and intersecting lines. They will also create a "trap" to catch the turkey on the route.

Students will create a route for their ozobot to travel using parallel, perpendicular and intersecting lines. They will also create a "trap" to catch the turkey on the route.

Students will create a route for their ozobot to travel using parallel, perpendicular and intersecting lines. They will also create a "trap" to catch a turkey, or other animal, on the route.

Students practice the ability to produce clear, complete, accurate and detailed design drawings through an engineering design challenge. Using only the specified materials, teams are challenged to draw a design for a wind-powered car. Then, they trade engineering drawings with another group and attempt to construct the model cars in order to determine how successfully the original design intentions were communicated through sketches, dimensions and instructions.

Purpose of UnitThe purpose of this Climate Science NTC Project GLAD® unit is a call to action, providing equity of access for all students. Through a model of instruction that promotes language development within core content, the Voices of Hope unit teaches students the science behind climate change and equips them with the tools necessary toward making a positive impact on our planet. This unit was written for 4th - 7th grade.

Students use inclined planes as they recreate the difficult task of raising a monolith of rock to build a pyramid. They compare the push and pull of different-sized blocks up an inclined plane, determine the angle of inclination, and learn the changes that happen when the angle is increased or decreased.

Students are asked to design methods to filter water using ordinary materials, while also considering their designs' material and cost efficiencies. They learn about the importance of water and its role in our everyday lives. They come to understand what must occur each day so that they can have clean water.

Students observe a model waterwheel to investigate the transformations of energy involved in turning the blades of a hydro-turbine. Students work as engineers to create model waterwheels while considering resources such as time and materials, in their design. Students also discuss and explore the characteristics of hydropower plants.

Students learn the history of the waterwheel and common uses for water turbines today. They explore kinetic energy by creating their own experimental waterwheel from a two-liter plastic bottle. They investigate the transformations of energy involved in turning the blades of a hydro-turbine into work, and experiment with how weight affects the rotational rate of the waterwheel. Students also discuss and explore the characteristics of hydroelectric plants.

Children use a toaster to generate wind and compare the appliance's heat source to Jupiter's own hot interior. They discover that convection drives wind on Jupiter and on Earth.

Students are presented with an overview of engineering and design. Various engineering disciplines are discussed in some detail using slides and an online video and website. The concept of design is introduced by presenting the basic steps of the engineering design process. Students learn that design is not necessarily restricted to engineering, but a general concept applicable to all walks of life. To strengthen their understanding, students are challenged to design a picnic for their friends by considering its various components as they go through the design process steps. This prepares them for subsequent design challenges such as those in the associated activities of this unit. A PowerPoint® presentation, pre/post quizzes and worksheet are provided.

This professional development course consists of a series of workshops focused on NGSS-aligned & local phenomenon-centered curriculum, developed by IslandWood with funding from the OSPI ClimeTime Grant. It is currently structured to be delivered online and for Upper Elementary (3-5) educators. A slide deck and accompanying handouts are available to complement the course outline. 

In this open-ended design activity, students use everyday materials milk cartons, water bottles, pencils, straws, candy to build small-scale transportation devices. They incorporate the use two simple machines a wheel and axle, and a lever into their designs. Student pairs choose their materials and engineer solutions suitable to convey pyramid-building materials (small blocks of clay). They race their carts/trucks, measuring distance, time and weight; and then calculate speed.