This resource is a video abstract of a research paper created by Research Square on behalf of its authors. It provides a synopsis that's easy to understand, and can be used to introduce the topics it covers to students, researchers, and the general public. The video's transcript is also provided in full, with a portion provided below for preview:

"New technologies for enhancing electronics and photonics are crucial for emerging applications in energy, sensing, artificial intelligence, and countless other areas. But these technologies are hard to come by using traditional semiconductors. Over the past decade, so-called third-generation semiconductors have proved to be a boon to materials science and engineering, giving researchers increased versatility in boosting device performance. Among the most promising properties of these materials is piezoelectricity—the ability to convert mechanical energy to electrical energy and vice versa. The December 2018 issue of the MRS Bulletin takes a look at how researchers are exploiting piezoelectricity in semiconductors to enhance electronic and photonic devices like never before, providing a glimpse into the world of piezotronics and piezo-phototronics. In 2006, Zhong Lin Wang’s group at Georgia Tech discovered that piezoelectricity in zinc oxide nanowires exerts a gating effect like that in transistors..."

The rest of the transcript, along with a link to the research itself, is available on the resource itself.

After a brief history of plastics, students look more closely as some examples from the abundant types of plastics found in our day-to-day lives. They are introduced to the mechanical properties of plastics, including their stress-strain relationships, which determine their suitability for different industrial and product applications. These physical properties enable plastics to be fabricated into a wide range of products. Students learn about the different roles that plastics play in our lives, Young's modulus, and the effects that plastics have on our environment. Then students act as industrial engineers, conducting tests to compare different plastics and performing a cost-benefit analysis to determine which are the most cost-effective for a given application, based on their costs and measured physical properties.

This lesson culminates the unit with the Go Public phase of the legacy cycle. In the associated activity, students depict a tumor amidst healthy body tissue using a Microsoft Excel® graph. In addition, students design a brochure for both patients and doctors advertising a new form of painless yet reliable breast cancer detection. Together, the in-class activity and the take-home assignment function as an assessment of what students have learned throughout the unit.

This resource is a video abstract of a research paper created by Research Square on behalf of its authors. It provides a synopsis that's easy to understand, and can be used to introduce the topics it covers to students, researchers, and the general public. The video's transcript is also provided in full, with a portion provided below for preview:

"Disruption of the gut microbiome composition is associated with many metabolic, inflammatory, and infectious diseases in humans. Accurately profiling microbiomes at the strain level is important for gaining a clear understanding of the microbiome’s role in disease. However, the existing tools can’t reliably classify microbes at strain resolution, making it difficult to detect composition changes. A new bioinformatic tool, SameStr, addresses this difficulty by identifying strains that are shared between metagenomes according to the similarity of single-nucleotide variants (SNVs) in certain species-specific marker genes. In validation studies, SameStr was more sensitive than other tools in identifying shared strains among mock populations, while remaining robust against false-positives..."

The rest of the transcript, along with a link to the research itself, is available on the resource itself.

1.050 is a sophomore-level engineering mechanics course, commonly labelled “Statics and Strength of Materials” or “Solid Mechanics I.” This course introduces students to the fundamental principles and methods of structural mechanics. Topics covered include: static equilibrium, force resultants, support conditions, analysis of determinate planar structures (beams, trusses, frames), stresses and strains in structural elements, states of stress (shear, bending, torsion), statically indeterminate systems, displacements and deformations, introduction to matrix methods, elastic stability, and approximate methods. Design exercises are used to encourage creative student initiative and systems thinking.

Students learn about the variety of materials used by engineers in the design and construction of modern bridges. They also find out about the material properties important to bridge construction and consider the advantages and disadvantages of steel and concrete as common bridge-building materials to handle compressive and tensile forces.

Students are introduced to the concepts of stress and strain with examples that illustrate the characteristics and importance of these forces in our everyday lives. They explore the factors that affect stress, why engineers need to know about it, and the ways engineers describe the strength of materials. In an associated literacy activity, while learning about the stages of group formation, group dynamics and team member roles, students discover how collective action can alleviate personal feelings of stress and tension.

The relationship between the stress and strain that a particular material displays is known as that particular material's stress–strain curve. It is unique for each material and is found by recording the amount of deformation (strain) at distinct intervals of tensile or compressive loading (stress). These curves reveal many of the properties of a material (including data to establish the Modulus of Elasticity

This course covers the fundamental concepts of structural mechanics with applications to marine, civil, and mechanical structures. Topics include analysis of small deflections of beams, moderately large deflections of beams, columns, cables, and shafts; elastic and plastic buckling of columns, thin walled sections and plates; exact and approximate methods; energy methods; principle of virtual work; introduction to failure analysis of structures. We will include examples from civil, mechanical, offshore, and ship structures such as the collision and grounding of ships.

Applies solid mechanics to analysis of high-technology structures. Structural design considerations. Review of three-dimensional elasticity theory; stress, strain, anisotropic materials, and heating effects. Two-dimensional plane stress and plane strain problems. Torsion theory for arbitrary sections. Bending of unsymmetrical section and mixed material beams. Bending, shear, and torsion of thin-wall shell beams. Buckling of columns and stability phenomena. Introduction to structural dynamics. Exercises in the design of general and aerospace structures.

This course covers the derivation of symmetry theory; lattices, point groups, space groups, and their properties; use of symmetry in tensor representation of crystal properties, including anisotropy and representation surfaces; and applications to piezoelectricity and elasticity.

The basic objective of Unified Engineering is to give a solid understanding of the fundamental disciplines of aerospace engineering, as well as their interrelationships and applications. These disciplines are Materials and Structures (M); Computers and Programming (C); Fluid Mechanics (F); Thermodynamics (T); Propulsion (P); and Signals and Systems (S). In choosing to teach these subjects in a unified manner, the instructors seek to explain the common intellectual threads in these disciplines, as well as their combined application to solve engineering Systems Problems (SP). Throughout the year, the instructors emphasize the connections among the disciplines.

Students are presented with a biomedical engineering challenge: Breast cancer is the second-leading cause of cancer-related death among women and the American Cancer Society says mammography is the best early-detection tool available. Despite this, many women choose not to have them; of all American women at or over age 40, only 54.9% have had a mammogram within the past year. One reason women skip annual mammograms is pain, with 90% reporting discomfort. Is there a way to detect the presence of tumors that is not as painful as mammography but more reliable and quantifiable than breast self-exams or clinical breast exams? This three lesson/three activity unit is designed for first-year accelerated or AP physics classes. It provide hands-on activities to teach the concepts of stress, strain and Hooke's law, which students apply to solve the challenge problem.

Students are introduced to the similarities and differences in the behaviors of elastic solids and viscous fluids. Several types of fluid behaviors are described Bingham plastic, Newtonian, shear thinning and shear thickening along with their respective shear stress vs. rate of shearing strain diagrams. In addition, fluid material properties such as viscosity are introduced, along with the methods that engineers use to determine those physical properties.

This resource is a video abstract of a research paper created by Research Square on behalf of its authors. It provides a synopsis that's easy to understand, and can be used to introduce the topics it covers to students, researchers, and the general public. The video's transcript is also provided in full, with a portion provided below for preview:

"Communication is key to business. If employees don’t communicate ideas or point out problems, organizations can struggle to improve efficiency and offer innovative products and services. That’s why leaders and organizations often encourage workers to voice their ideas and perspectives. If employees speak up and express their ideas and opinions, the thinking goes, then they’re not remaining silent about other problems or concerns. It turns out, that’s not the case. In an Academy of Management Journal paper, researchers analyzed multiple studies involving thousands of employees to understand the link between voice (how often employees volunteer constructive ideas or issues at work) and silence (the extent to which they intentionally withhold ideas or issues). The conclusion was that the two behaviors were virtually independent. The research found that voice and silence are driven by different psychological factors..."

The rest of the transcript, along with a link to the research itself, is available on the resource itself.

In addition to the associated lesson, this activity functions as a summative assessment for the Using Stress and Strain to Detect Cancer unit. In this activity, students will create a 1-D strain plot in Microsoft Excel depicting the location of a breast tumor amidst healthy tissue. The results of this activity will function as proof of the accuracy and reliability of the students' breast cancer detection design.